1 post / 0 new
#1 Nov 13, 2017
sh park
Offline
Last seen: 1 week 1 day ago
Joined: 2016-05-25 04:13

Floating/unmodeled pin fixups Error occured while followiing application note of "Hardware in Loop"

Hi,

I'm following the application note of "Hareware in Loop" on Pspice.com

then error occured as below.

Please somebody tell me why this error occures and how to fix this.

 

Thank you.

 

**** INCLUDING SCHEMATIC1.net ****
* source ARDUINOHIL
R_R1         LED N9064075  10 TC=0,0
D_D1         LED N9062662 Dbreak
E_U10         N9064075 0 VALUE {LIMIT(V(N9060435,LIGHT_DETECTOR)*100,0V,+15V)}
R_R2         0 MOVE  1G TC=0,0
R_R3         0 TEMP  1G TC=0,0
V_V1         N9060435 0 10
X_U11         TEMP NOISE MATLAB_AVGFILTER
C_C1         LED 0  10uf  TC=0,0
X_U12         M_UN0001 M_UN0002 M_UN0003 N9062662 M_UN0004 MOVE M_UN0005
+  M_UN0006 M_UN0007 M_UN0008 M_UN0009 M_UN0010 M_UN0011 M_UN0012 M_UN0013
+  M_UN0014 M_UN0015 M_UN0016 LIGHT_DETECTOR NOISE ARDUINOHILDEMO1 PARAMS:
+  INST_BAUDRATE=9600 INST_COMPORT=4 MOD_MAXSTEPSIZE=1E+30
** Floating/unmodeled pin fixups **
R__UC0001   M_UN0001  0   {1/GMIN}
R__UC0002   M_UN0002  0   {1/GMIN}
R__UC0003   M_UN0003  0   {1/GMIN}
R__UC0004   M_UN0004  0   {1/GMIN}
R__UC0005   M_UN0005  0   {1/GMIN}
R__UC0006   M_UN0006  0   {1/GMIN}
R__UC0007   M_UN0007  0   {1/GMIN}
R__UC0008   M_UN0008  0   {1/GMIN}
R__UC0009   M_UN0009  0   {1/GMIN}
R__UC0010   M_UN0010  0   {1/GMIN}
R__UC0011   M_UN0011  0   {1/GMIN}
R__UC0012   M_UN0012  0   {1/GMIN}
R__UC0013   M_UN0013  0   {1/GMIN}
R__UC0014   M_UN0014  0   {1/GMIN}
R__UC0015   M_UN0015  0   {1/GMIN}
R__UC0016   M_UN0016  0   {1/GMIN}

**** RESUMING Trans.cir ****
.END

ERROR(ORPSIM-15041): Failed to load ArduinoHILDemo1.dll.
Error during loading Model dll ArduinoHILDemo1.dll: ?

Download PSpice Lite and try it for free! Get PSpice Lite
Cadence