Back to Forums
14 posts / 0 new
Last post
#1 Apr 29, 2018
viviana
Offline
Last seen: 5 years 11 months ago
Joined: 2018-04-29 16:23

ERROR(ORPSIM-15108): Subcircuit UA798 used by X_U1A is undefined

I downloaded the trial version of OrCad Pspice. I'm trying to do some simulation using Capture with opamp and transistor but it doesn't work. The error message is:ERROR(ORPSIM-15108): Subcircuit UA798 used by X_U1A is undefined. How can I solve the problem?

I also need LT3080 and LT3081 for simulation. Are they available?

 

Mon, 2018-04-30 04:23
RobertoGb
RobertoGb's picture
Offline
Last seen: 5 years 9 months ago
Joined: 2016-05-24 03:10

Hi,

It is strange that the simulation does not work, because the component UA798 is included in the default PSpice component. Could you tell me please which version you installed? If you open the simulation profile, which libraries do you have included in Configuration files --> Libraries? 

In relation to the components LT3080 and LT3081, they are not avaiable for simulation in the default libraries. So you have to look for them in internet. 

regards

Fri, 2020-10-02 18:29 (Reply to #2)
pricealexander
Offline
Last seen: 3 years 4 months ago
Joined: 2020-09-26 12:46

I'm getting the same error, but with component LM741. 

Version is 17.4-2020-S004; configured libraries are nom.lib*, nom_pspti.lib*,  lm741.olb, and lm741.lib

Mon, 2018-04-30 05:53
viviana
Offline
Last seen: 5 years 11 months ago
Joined: 2018-04-29 16:23

Thanks, I've found a solution to the problem. Can you please give me some advice on where I can found LT3080 or LT3081 for simulation?? 

Mon, 2018-06-18 03:39
AOleksii
Offline
Last seen: 5 years 9 months ago
Joined: 2018-06-18 02:40

Hi,

help me, please, solve a problem. 

I did with  Create Subcircut Format Netlist PSpice modell for Transformer

.SUBCKT Transfformer2W Pri1 Pri2 Sec1 Sec2 

R_Rp1         PRI1 N01732  500 TC=0,0

L_Lp1         N01732 PRI2  100mH 

R_Rs1         N01742 SEC1  10 TC=0,0

Kn_K1         L_Lp1 L_Ls1     1

L_Ls1         N01742 SEC2  100mH 

.ENDS

I did the Library *.olb with Model Editor

 

STATUS: PSpice Schematics to Capture translator (17.2.0.d001)

STATUS: 

STATUS: Translator started at Monday, June 18, 2018 09:14:14

STATUS: c:\cadence\spb_17.2\tools\bin\sch2cap -f "C:\Users\abramov\Documents\Personalordner\OrCad Projekts\Transformer2W\Transfformer2W-PSpiceFiles\Transfformer2W\Transfformer2W.LIB" -o "C:\Users\abramov\Documents\Personalordner\OrCad Projekts\Transformer2W\Transfformer2W-PSpiceFiles\Transfformer2W\Transfformer2W.olb" -i C:\SPB_DATA\cdssetup\OrCAD_PSpice/17.2.0/PSpice.ini

INFO(ORSCH-1029): Using existing library 'c:\cadence\spb_17.2\tools\Capture\Library\PSpice\modeled.etc'.

INFO(ORSCH-1031): Created new library 'C:\Users\abramov\Documents\Personalordner\OrCad Projekts\Transformer2W\Transfformer2W-PSpiceFiles\Transfformer2W\Transfformer2W.olb'.

STATUS: Translator stopped at Monday, June 18, 2018 09:14:15

STATUS: 0 Error messages, 0 Warning messages

 

During the test run of simulation of the circuit with a load resistor, an error occurs:

*Libraries:
* Profile Libraries :
* Local Libraries :
* From [PSPICE NETLIST] section of C:\SPB_DATA\cdssetup\OrCAD_PSpice\17.2.0\PSpice.ini file:
.lib "nom.lib"
*Analysis directives:
.TRAN  0 18m 0 50u
.OPTIONS ADVCONV
.PROBE64 V(alias(*)) I(alias(*)) W(alias(*)) D(alias(*)) NOISE(alias(*))
.INC "..\SCHEMATIC1.net"
 
**** INCLUDING SCHEMATIC1.net ****
* source TR2W_S
X_U1         N00176 0 N00195 0 TRANSFFORMER2W
R_R1         N00195 0 1000k
V_V1         N00176 0 
+SIN 0 50 10k 0 0 0
**** RESUMING tr2_1.cir ****
.END
ERROR(ORPSIM-15108): Subcircuit TRANSFFORMER2W used by X_U1 is undefined
Mon, 2018-06-18 04:41 (Reply to #5)
oldmouldy
Offline
Last seen: 2 years 4 months ago
Joined: 2016-07-06 04:23

You need to add the LIB file for you sub-circuit to the Simulation Profile, PSpice>Edit Simulation Profile, Configuration Files, Library, use the upper Browse button to locate your LIB file and use the Add to Design button to add your LIB file to the Design Simulation Profile.

Fri, 2020-10-02 18:18 (Reply to #6)
pricealexander
Offline
Last seen: 3 years 4 months ago
Joined: 2020-09-26 12:46

This method did not fix the issue on my end: I get 

ERROR(ORPSRVR-2151): Cannot add the file as it is already configured!.

 

Mon, 2018-06-18 06:11
AOleksii
Offline
Last seen: 5 years 9 months ago
Joined: 2018-06-18 02:40

 

Thank you very much for your help!

Everything works perfectly.

Is it possible to make so, that the modells by me could be connected at a stage of creation of the circuit throuth a standart command „to add base“ (Naturally, I will create a OLB library for this model and associate it with the corresponding PSpice model)?

Fri, 2023-03-31 03:12
lindausa0106
Offline
Last seen: 11 months 6 hours ago
Joined: 2023-03-31 03:05

The error message "ERROR(ORPSIM-15108): Subcircuit UA798 used by X_U1A is undefined" shows Pokemon Showdown that PSpice cannot find the subcircuit named UA798, which is used by circuit component X_U1A.

Fri, 2023-05-12 05:40
snehapatel
Offline
Last seen: 9 months 3 weeks ago
Joined: 2023-03-23 07:01

We offer both kind of Pune escorts service - IN CALLS and OUT CALLS. Our agency will take care if you are looking for Pune Call Girls in costly hotels. On the other way if you do not have any hotel then you can come to our agency hotel at any time 24x7. 

Sun, 2023-06-11 07:26
Jones Elizabeth
Offline
Last seen: 2 hours 4 min ago
Joined: 2022-06-07 06:20

Particular interviews furnish firsthand message on mart size, industry trends, ontogeny trends, capitalist landscape and outlook, etc. Freizeitjacke für Damen

Fri, 2023-09-01 03:36
karausa
Offline
Last seen: 3 months 5 days ago
Joined: 2023-06-22 00:34

If you do not find a library for "UA798," you may need to download or create a corresponding emulation library. This may require you to search for documentation 

The Password Game or mockup information from an official source, or create a custom mockup library for that asset. 

Fri, 2023-10-13 04:07
victorpatrick
victorpatrick's picture
Offline
Last seen: 3 months 5 days ago
Joined: 2023-05-24 04:46

The LIB file for your sub-circuit must be added to the Simulation Profile. Go to PSpice>Edit Simulation Profile, Configuration Files, Library, find your LIB file using the top Browse button, then select Add to Design to add it to the

tunnel rush Design Simulation Profile.

Fri, 2023-10-27 00:50
lewishamilton
Offline
Last seen: 4 months 1 week ago
Joined: 2023-10-27 00:44

 Hi, I am using Orcad 16.6-p005(v16-6-112D) , on Windows 10 and any model like Max907 from Pspice/MAX.OLB or IRF152 from powermos.olb  retro bowl college

Download PSpice and try it for free! Download Free Trial
Cadence