Hy all,
Anywone know why PSPICE ADVANCE ANALYSIS not taken in consideration capacitance model from other supplier?For example i used capacitor model from MURATA,KEMET...TDK supplier and there are not taken in consideration on SMOKE or other advance Analysis!
Please if someoane know how or why...
Thanks you!
Copyright © 2020 Cadence Design Systems, Inc. All rights reserved.
Hi,
I do not understand your question. Could you send one of the models you mention (just copy the model definition and paste it here).
Thx
Hy RobertoGb,
* PSpice Model Editor - Version 16.5.0
*$
.SUBCKT C0402C103K5RAC 1 6
*#ASSOC symbol=cap category=Capacitors simulator=simetrix|simplis
* Temp@ 25°C, Bias@ 0Vdc , Center Freq@ 1.000MHz
* KEMET Model RLC Cerm.JPG / Spice Version 3.9.52
L1 1 2 95.00E-12
L2 2 3 1.80E-09
R1 3 4 720.56E-03
C1 4 6 9.10E-09
R2 2 5 34.5
C2 5 6 2.80E-12
R3 1 6 100.000E+09
.ENDS
*$
It is a model from KEMET "C0402C103K5RAC" capacitor supplier.
If i put SMOKE parameters and then perform a SMOKE advance simulation,capacitor is not see in the analysis.It is not take in consideration and i don't understand why.If i used a capacitor from EVLAA lybrary and put SMOKE parameters is taken in consideration on analysis but i wan't to used model from supplier.
Hi,
Now I understand. I will try to get the smoke results
Hello RobertoGb,
Do you try model capacitor on Smoke analysis?It is working on you?I search more to find some ensure but syill nothing :( .
Have nice day!
Hello RobertoGb,
Do you try model capacitor on Smoke analysis?