Did anyone know how to generate the schematic from Netlist, Or any one could help me know which MOSFET I should choose

I have undefined mosfet netlist from the data sheet (That MOSFET ( DE475-102N21A) model is an expansion of the SPICE level 3 MOSFET model.) and I want to add in that to the schematic and do the simulation based on that netlist. Does anyone know how to generate the schematic just based on netlist? Or anyone could help me figure out which MOSFET in the netlist as (MODEL DMOS NMOS (LEVEL=3 VTO=3.0 KP=3.8)) I should choose to put in my component schematic? 

I also want to place each part from the netlist, however there are some netlist information I don't know which symbol I should use in schematic and edit that model, generally I don’t which basic MOSFET and diode I should put in. Here is the netlist and I also attached equivalent circuits of this MOSFET provided by Datasheet. 

Thank you very much if you could provide any information or suggestions.

Net List:
.SUBCKT 102N21A 10 20 30
* TERMINALS: D G S
* 1000 Volt 21 Amp 0.45 ohm N-Channel Power MOSFET
* REV.A 01-09-02
M1 1 2 3 3 DMOS L=1U W=1U
RON 5 6 0.3
DON 6 2 D1
ROF 5 7 .1
DOF 2 7 D1
D1CRS 2 8 D2
D2CRS 1 8 D2
CGS 2 3 5.5N
RD 4 1 0.45
DCOS 3 1 D3
RDS 1 3 5.0MEG
LS 3 30 .5N
LD 10 4 1N
LG 20 5 1N
.MODEL DMOS NMOS (LEVEL=3 VTO=3.0 KP=3.8)
.MODEL D1 D (IS=.5F CJO=1P BV=100 M=.5 VJ=.6 TT=1N)
.MODEL D2 D (IS=.5F CJO=400P BV=1000 M=.4 VJ=.6 TT=400N RS=10M)
.MODEL D3 D (IS=.5F CJO=900P BV=1000 M=.3 VJ=.4 TT=400N RS=10M)
.ENDS