5 posts / 0 new
Last post
#1 Apr 5, 2019
shimashima
Offline
Last seen: 2 weeks 6 days ago
Joined: 2019-04-05 03:05

error (ORPSIM-15113) and say that it is undefined model.

I can not define the lib file of FET brought from semiconductor manufacturer's web. I am getting an error (ORPSIM-15113) and say that it is undefined. The symbol file is taken from Breakout.olb, the part attribute "implementation" is changed to the name of the lib file (without the extension), and the lib file is registered in the simulationSetting's library category of the simulation file. What is it?

Fri, 2019-04-05 03:58
RobertoGb
RobertoGb's picture
Offline
Last seen: 1 week 9 hours ago
Joined: 2016-05-24 03:10

Hello,

Which name have you written down in the implementation model, the name of the library or the name of the component? You have to write down the name of the component and the library has to be added in the simulation profile (I think you already did this).

Regards

Fri, 2019-04-05 04:38 (Reply to #2)
shimashima
Offline
Last seen: 2 weeks 6 days ago
Joined: 2019-04-05 03:05

Hi Roberto

Thank you for your prompt reply. I do it as follows.

1: Bring the pspice model (.lib file) of FET from semiconductor manufacturer

2: Bring the components of FET from brakeout.olb and paste them on the schematic.

3: Describe the library name (.lib file) in "implementation" and "Value" in Edit Part Attributes.

4: Open simulation setting and register lib file in the library category of configuration file. Is it OK if I register breakout.olb in the same library category?

 

The version of pspice is 16.6

Regards

Fri, 2019-04-05 04:46
RobertoGb
RobertoGb's picture
Offline
Last seen: 1 week 9 hours ago
Joined: 2016-05-24 03:10

Why do not you generate directly OLB for such LIB using model editor? I think it is much easier and faster.

Let me know

Fri, 2019-04-05 04:56 (Reply to #4)
shimashima
Offline
Last seen: 2 weeks 6 days ago
Joined: 2019-04-05 03:05

Hi Roberto

It is the method described in the Pspice reference book. However, the reference book is an old version. Certainly, I try to make an olb file from the beginning.

Thank you again if there is something else.

Download PSpice Lite and try it for free! Get PSpice Lite
Cadence