Hello, I'd like to get an analog signal (voltage) from a current value that flows in an element (example I(C1)) without use an H (from analog library) component.
First of all I don't see why you're opposed to using an H device in series, it's the cleanest solution and doesn't affect the circuit. If absolutely can't then drop a low ohm series R ( 0.01 ohm?) in the path and measure drop across it, seems that defeats the purpose though. This is the traditional current sense setup.
First of all I don't see why you're opposed to using an H device in series, it's the cleanest solution and doesn't affect the circuit. If absolutely can't then drop a low ohm series R ( 0.01 ohm?) in the path and measure drop across it, seems that defeats the purpose though. This is the traditional current sense setup.