FlowCAD is hosting a webinar on how PSpice AA Smoke can be utilized to analyze the reliability of a DC-DC converter including the heat sink and custom de-rating parameters.
FlowCAD is hosting a webinar to see how PSpice AA can be utilized to analyze power distribution network design specifications to analyze the manufacturing yield of DC-DC converters.
in this webinar, you will learn how this co-simulation works, which advantages it has, in which scenarios it is mostly used and why it is a very good option when you are challenged with analog/mixed-signal designs.
In this webinar, you will learn to define components with parasitics directly from datasheet, to analyze system stability, to calculate magnetic cores losses and to define hundreds of designs and simulations in the same project.
In this Webinar you will learn how many extra functionalities added in PSpice can be used and in which circumstances they will enable you to analyze deeper and faster the performance of your designs.
In this webinar, you will learn to check if your design has individual components being over-stressed, to find optimum combination of component values to reach performance requirements and to retarget existing designs with new goals without modifying the layout.
Join the webinar to learn how to check the critical sensitivity of your PCB design, find and prevent future problems and component failure during manufacturing, as well as how to test design operation over manufacturing tolerance variations outside temperature ranges.
Join the webinar to learn how you can use the Device Model Interface capability to connect your Arduino board with PSpice to simulate Hardware in the Loop with sensor transmitting data in both the directions.
Join this webinar to learn how you can create a model using Device Modeling Interface feature, which allows to abstract the model behavior of a component and adapt it to the evaluation of the whole system in PSpice.
Join this webinar to understand how to use the default components in PSpice and the options PSpice provides to develop new components from Datasheet.
Copyright © 2020 Cadence Design Systems, Inc. All rights reserved.
