**** 10.05.20 14:21:41 ******* PSpice 17.4.0 (ноябрь 2018 г.) ******* ID # 0 ********
** Профиль: "SCHEMATIC1-3" [C: \ Users \ 777 \ Desktop \ labs \ power-PSpiceFiles \ SCHEMATIC1 \ 3.sim]
**** ОПИСАНИЕ ЦЕПИ
************************************************ * ***************************
** Создание файла схемы "3.cir"
** ПРЕДУПРЕЖДЕНИЕ: ДАННЫЙ АВТОМАТИЧЕСКИЙ ФАЙЛ МОЖЕТ БЫТЬ ПЕРЕЗАПИСАН ПРИ ПОСЛЕДУЮЩЕМ МОДЕЛИРОВАНИИ.
* Библиотеки:
* Профильные библиотеки:
* Локальные библиотеки:
* Из [PSPICE NETLIST] файла C: \ SPB_DATA \ cdssetup \ OrCAD_PSpice \ 17.4.0 \ PSpice.ini:
.lib "nom.lib"
* Директивы анализа:
.TRAN 0 1000ns 0
.STEP LIN 3 10 0 1
---------- $
ERROR (ORPSIM-16063): должно быть 'I' или 'V'
.OPTIONS ADVCONV
.PROBE64 V ( псевдоним (*)) I (псевдоним (*)) W (псевдоним (*)) D (псевдоним (*)) NOISE (псевдоним (*))
.INC ".. \ SCHEMATIC1.net"
**** ВКЛЮЧАЯ SCHEMATIC1.net ****
* МОЩНОСТЬ источника
V_V1 0 0 50Vdc
R_R1 0 N14385 5
R_R2 0 N14385 10
**** ВОЗОБНОВЛЕНИЕ 3.cir ****
.END
Copyright © 2020 Cadence Design Systems, Inc. All rights reserved.
Configuration of parametric sweep in your simulation setup is not done correctly. It must include sweep variable name, which seems to be missing.
An error known as ERROR(ORPSIM-16063) Must be 'I' or 'V' can occur when trying to simulate a circuit in OrCAD. This error is typically caused by an incorrect value being entered for a current or voltage source. To fix this error, you must ensure that the correct values are entered for all current and voltage sources in the circuit.
https://www.omegle.fyi/
https://www.chatrandom.one/
https://www.bazoocam.fyi/
There seems to be an error in the PSPice simulation related to the analysis instructions. The error message says it should be 'I' or 'V'. Double-check the analytical indicators and ensure that they are correctly specified as 'I' or 'V' as required. Additionally, with omegle you can have random text or video chats with anonymous people