I received the error: ERROR(ORPSIM-15461): Incorrect number of interface nodes for a new project. It involved gates in the DIG_PRIM.OLB. I made a test example project to dupicate the error. I connect an INV gate to DSTM1 (clock). That design produces the error. When I replace the INV with a NAN2 (or a NAN3) with the inputs tied together, the simulation runs.
Copyright © 2024 Cadence Design Systems, Inc. All rights reserved.
This issue typically arises when there is a discrepancy or misalignment
spacebar clicker between the expected and actual number of interface nodes within a system or program.
Thanks for the useful information from your article flagle
Stay engaged with the game through weekly updates that bring new content, challenges, and features. Drift Hunters ensures a dynamic and evolving experience for its dedicated player base.
The first time I encountered a display error like this. You should definitely contact the manager directly for more effective information. It will be difficult to find a solution without encountering this geometry dash lite situation
I have never seen a display error like this before. To get better information, you should absolutely talk to the manager face-to-face. Solving the problem will be challenging because of the large number of gorilla tag
In your specific case, it seems that the error occurs when you connect an INV gate to DSTM1 (clock), while using the DIG_PRIM.OLB library. However, when you replace the INV gate with a NAN2 or NAN3 gate, with the inputs tied together, the simulation runs without errors.