Hi,
I'm wondering if it's possible to send waveform measurements to either the output file, or a separate file automatically.
Basically, I'd like to run a simulation, have mesurements taken (viat the 'waveform' 'measurements' menu), and have the measurement values available via a file on the hard drive.
Can't seem to find anything where this would be possible...
Copyright © 2020 Cadence Design Systems, Inc. All rights reserved.
After you run your simulation, in Probe select File > Export > Stimulus Library to create a stimulus file that you can use with the VSTIM and ISTIM sources. The stimulus file will be saved in the project_folder/<proj_name)_PSpiceFiles/schematic folder. You can open the file with the Stimulus Editor to view the stimulus names in the file and then use those names on the VSTIM and ISTIM sources.
Thanks. And is there a way to setup a measurement, and have the value of the measurement (which is calculated at the end of the simulation) to be saved in a file on the hard drive?
You can set-up measurements using Trace>measurements and display the value of measurements in PSpice probe window.Though u can separately save your custom measurements as .prb file and waveform data as .dat or .csv file on hard drive, but for saving measurement results option is to copy paste the measurement window either in text editor or take a snapshot and save as image file.